Products

Cincom M32
LFV tecnology
Sliding Headstock Type Automatic CNC Lathe

Cincom M32

Ultimate Gang + Turret: The M32 is reborn

Structural analysis was performed to achieve a highly rigid design that provides an optimal balance between strength and weight to greatly improve the rigidity required during machining.

  • Adoption of newly designed cover to provide workability, as well as a new HMI operating panel for the new NC unit and touch panel provides improved operability and productivity.
  • The turret tooling has been completely redesigned with a conversion to single-drive for rotary tools and strengthening of the rotary tools motor.
  • he gang tool post has been equipped with a programmable B axis (45° backside and 105° front side) type VIII. The back tool post has been equipped with three-tool adjustable angle spindles type VII and VIII to provide even more complex machining.
  • Compatible with LFV Modes 1, 2 and 3 (optional), this model alleviates chip-related issues not only when processing linear surfaces, but also in a wide range of other situations such as tapered, circular, drilling, and internal threading processing.
Item M32V M32VII M32VIII
Max. machining diameter (D) 32mm Dia. (38mm Dia. OP)
Max. machining length (L) 320mm/1chucking
Max. front drilling diameter 12mm Dia.
Max. tapping diameter for the front spindle M12 (Cutting tap)
Main spindle speed Max8,000min-1
Max. chuck diameter for the back spindle 32mm Dia. (38mm Dia. OP)
Max. drilling diameter for the back spindle 12mm Dia.
Max. tapping diameter for the back spindle M12 (Cutting tap)
Max. length of the back spindle workpiece 145mm (Standard recovery unit)
Back spindle speed Max.8,000min-1
Gang rotary tools Max. drilling diameter 8mm Dia.
Max. tapping diameter M8 (Cutting tap)
Main spindle speed Max.9,000min-1
Turret rotary tools Max. drilling diameter 12mm Dia.
Max. tapping diameter M12 (Cutting tap)
Main spindle speed Max.6,000min-1
Back rotary tools Max. drilling diameter 8mm Dia.
Max. tapping diameter M6 (Cutting tap)
Main spindle speed Max.6,000min-1
Number of tools Max. 25 to 27 +α 23 to 31 +α 30 to 36 +α
Turning tools 5
Cross drills 5 to 7 8(including 4 B-axis drills)
Gang tool post backside drills 4(including 4 B-axis drills)
Number of turret stations 10
Back tool post drills 5 Max.9
Tool size Turning tool 16mm Sq.
Sleeve diameter 25.4mm Dia.
Rapid feed rate X1,Y1,Z1,Z2,X3,Z3 32m/min
Y3 32m/min
X2 18m/min
Y2 12m/min
B1 50m/min
Motors Front spindle drive 5.5/7.5kW
Back spindle drive 5.5/7.5kW
Gang rotary tool drive 2.2kW
Turret rotary tool drive 2.2kW
Back rotary tool drive 1.0kW
Pneumatic unit: Required pressure and required flowrate 0.5MPa at 110NL/min (When stationary)
Machine main unit dimensions W2,860 × D1,465 × H1,900mm
Weight 4,300kg
Rated power consumption 24kVA 25kVA
Load operation average power 13.1kVA
Full-load current 79A
Main breaker capacity 100A
M32V
Max. machining diameter (D)
32mm Dia.(38mm Dia. OP)
Max. machining length (L)
320mm/1chucking
Max. front drilling diameter
12mm Dia.
Max. tapping diameter for the front spindle
M12 (Cutting tap)
Main spindle speed
Max8,000min-1
Max. chuck diameter for the back spindle
32mm Dia. (38mm Dia. OP)
Max. drilling diameter for the back spindle
12mm Dia.
Max. tapping diameter for the back spindle
M12 (Cutting tap)
Max. length of the back spindle workpiece
145mm (Standard recovery unit)
Back spindle speed
Max.8,000min-1
Gang rotary tools [Max. drilling diameter]
8mm Dia.
Gang rotary tools [Max. tapping diameter]
M8 (Cutting tap)
Gang rotary tools [Main spindle speed]
Max.9,000min-1
Turret rotary tools [Max. drilling diameter]
12mm Dia.
Turret rotary tools [Max. tapping diameter]
M12 (Cutting tap)
Turret rotary tools [Main spindle speed]
Max.6,000min-1
Back rotary tools [Max. drilling diameter]
8mm Dia.
Back rotary tools [Max. tapping diameter]
M6 (Cutting tap)
Back rotary tools [Main spindle speed]
Max.6,000min-1
Number of tools [Max.]
25 to 27+α
Number of tools [Turning tools]
5
Number of tools [Cross drills]
5 to 7
Number of tools [Gang tool post backside drills]
-
Number of tools [Number of turret stations]
10
Number of tools [Back tool post drills]
5
Tool size [Turning tool]
16mm Sq.
Tool size [Sleeve diameter]
25.4mm Dia.
Rapid feed rate [X1,Y1,Z1,Z2,X3,Z3]
32m/min
Rapid feed rate [Y3]
-
Rapid feed rate [X2]
18m/min
Rapid feed rate [Y2]
12m/min
Rapid feed rate [B1]
-
Motors [Front spindle drive]
5.5/7.5kW
Motors [Back spindle drive]
5.5/7.5kW
Motors [Gang rotary tool drive]
2.2kW
Motors [Turret rotary tool drive]
2.2kW
Motors [Back rotary tool drive]
1.0kW
Pneumatic unit: Required pressure and required flowrate
0.5MPa at 110NL/min (When stationary)
Machine main unit dimensions
W2,860×D1,465×H1,900mm
Weight
4,300kg
Rated power consumption
24kVA
Load operation average power
13.1kVA
Full-load current
79A
Main breaker capacity
100A
M32VII
Max. machining diameter (D)
32mm Dia.(38mm Dia. OP)
Max. machining length (L)
320mm/1chucking
Max. front drilling diameter
12mm Dia.
Max. tapping diameter for the front spindle
M12 (Cutting tap)
Main spindle speed
Max8,000min-1
Max. chuck diameter for the back spindle
32mm Dia. (38mm Dia. OP)
Max. drilling diameter for the back spindle
12mm Dia.
Max. tapping diameter for the back spindle
M12 (Cutting tap)
Max. length of the back spindle workpiece
145mm (Standard recovery unit)
Back spindle speed
Max.8,000min-1
Gang rotary tools [Max. drilling diameter]
8mm Dia.
Gang rotary tools [Max. tapping diameter]
M8 (Cutting tap)
Gang rotary tools [Main spindle speed]
Max.9,000min-1
Turret rotary tools [Max. drilling diameter]
12mm Dia.
Turret rotary tools [Max. tapping diameter]
M12 (Cutting tap)
Turret rotary tools [Main spindle speed]
Max.6,000min-1
Back rotary tools [Max. drilling diameter]
8mm Dia.
Back rotary tools [Max. tapping diameter]
M6 (Cutting tap)
Back rotary tools [Main spindle speed]
Max.6,000min-1
Number of tools [Max.]
23 to 31+α
Number of tools [Turning tools]
5
Number of tools [Cross drills]
5 to 7
Number of tools [Gang tool post backside drills]
-
Number of tools [Number of turret stations]
10
Number of tools [Back tool post drills]
Max.9
Tool size [Turning tool]
16mm Sq.
Tool size [Sleeve diameter]
25.4mm Dia.
Rapid feed rate [X1,Y1,Z1,Z2,X3,Z3]
32m/min
Rapid feed rate [Y3]
32m/min
Rapid feed rate [X2]
18m/min
Rapid feed rate [Y2]
12m/min
Rapid feed rate [B1]
-
Motors [Front spindle drive]
5.5/7.5kW
Motors [Back spindle drive]
5.5/7.5kW
Motors [Gang rotary tool drive]
2.2kW
Motors [Turret rotary tool drive]
2.2kW
Motors [Back rotary tool drive]
1.0kW
Pneumatic unit: Required pressure and required flowrate
0.5MPa at 110NL/min (When stationary)
Machine main unit dimensions
W2,860×D1,465×H1,900mm
Weight
4,300kg
Rated power consumption
24kVA
Load operation average power
13.1kVA
Full-load current
79A
Main breaker capacity
100A
M32VIII
Max. machining diameter (D)
32mm Dia.(38mm Dia. OP)
Max. machining length (L)
320mm/1chucking
Max. front drilling diameter
12mm Dia.
Max. tapping diameter for the front spindle
M12 (Cutting tap)
Main spindle speed
Max8,000min-1
Max. chuck diameter for the back spindle
32mm Dia. (38mm Dia. OP)
Max. drilling diameter for the back spindle
12mm Dia.
Max. tapping diameter for the back spindle
M12 (Cutting tap)
Max. length of the back spindle workpiece
145mm (Standard recovery unit)
Back spindle speed
Max.8,000min-1
Gang rotary tools [Max. drilling diameter]
8mm Dia.
Gang rotary tools [Max. tapping diameter]
M8 (Cutting tap)
Gang rotary tools [Main spindle speed]
Max.9,000min-1
Turret rotary tools [Max. drilling diameter]
12mm Dia.
Turret rotary tools [Max. tapping diameter]
M12 (Cutting tap)
Turret rotary tools [Main spindle speed]
Max.6,000min-1
Back rotary tools [Max. drilling diameter]
8mm Dia.
Back rotary tools [Max. tapping diameter]
M6 (Cutting tap)
Back rotary tools [Main spindle speed]
Max.6,000min-1
Number of tools [Max.]
30 to 36+α
Number of tools [Turning tools]
5
Number of tools [Cross drills]
8(including 4 B-axis drills)
Number of tools [Gang tool post backside drills]
4(including 4 B-axis drills)
Number of tools [Number of turret stations]
10
Number of tools [Back tool post drills]
Max.9
Tool size [Turning tool]
16mm Sq.
Tool size [Sleeve diameter]
25.4mm Dia.
Rapid feed rate [X1,Y1,Z1,Z2,X3,Z3]
32m/min
Rapid feed rate [Y3]
32m/min
Rapid feed rate [X2]
18m/min
Rapid feed rate [Y2]
12m/min
Rapid feed rate [B1]
50m/min
Motors [Front spindle drive]
5.5/7.5kW
Motors [Back spindle drive]
5.5/7.5kW
Motors [Gang rotary tool drive]
2.2kW
Motors [Turret rotary tool drive]
2.2kW
Motors [Back rotary tool drive]
1.0kW
Pneumatic unit: Required pressure and required flowrate
0.5MPa at 110NL/min (When stationary)
Machine main unit dimensions
W2,860×D1,465×H1,900mm
Weight
4,300kg
Rated power consumption
25kVA
Load operation average power
13.1kVA
Full-load current
79A
Main breaker capacity
100A
Inquiries
Feel free to get in touch with us by phone or online if you have any questions or need advice about any of our products or services.
GLOBAL SOLUTION CENTER
See an overview of alkapplysolution
LFV technology
Page Top